SynPower FE 5W-30
April 1, 2021SynPower ENV C2 0W-30
April 1, 2021SynPower ENV C1 5W-30
Get a Free Quote. Enquire Now.
Features and Benefits
- SynPower ENV C1 5W-30 is a full synthetic lubricant developed for vehicles requiring low SAPS engine oil.
- Its low viscosity enables superior cold start and faster oil flow at start up.
- This catalyst compatible engine oil uses the newest additive technology and meets the latest European standards applicable for diesel vehicles with or without a DPF.
- New Easy Pour packaging with the 5L packs allow for a smooth, continuous stream of oil with each and every pour thanks to a built-in ANTI-GLUG TUBE TM combined with a wide spout.
- An ergonomic bottle and centralised handle design combined with easy to read labels make choosing and using the right oil simple.
Category: SYNPOWER RANGE - Full Synthetic Oils
Specifications
- ACEA C1
- FORD WSS-M2C-934-B
- SAE 5W-30
Part Numbers | Pack Size | APN | TUN |
---|---|---|---|
1334.28 | 208LTR | 9310009014092 | |
1334.20 | 20LTR | 9310009014108 | |
1334.05 | 5LTR | 9310009019196 | 19310009019193 |
1334.01 | 1LTR | 9310009019141 | 19310009019148 |
SynPower ENV C1 5W-30 is a premium full synthetic engine oil, specially designed for use in modern vehicles requiring catalyst compatible engine oil. SynPower ENV C1 5W-30 is suitable for use in petrol and diesel passenger vehicles as well as light duty diesel vehicles fitted with or without DPF emission systems and petrol engines with TWC emission systems.
SynPower ENV C1 5W-30 is a low viscosity, low SAPS lubricant with low ash, phosphorus and sulphur content to protect emission reduction systems and improve fuel efficiency.
Suitable for Ford; Jaguar; Land Rover; Mazda; Mitsubishi.*
Not suitable for use in engines requiring ACEA C2, C3 and C4 specification.
*Refer to owner’s manual for recommended oil specifications and change intervals.
Related products
SynPower MST C3 5W-40
Features and Benefits- SynPower MST 5W-40 is a full synthetic engine oil suitable for European diesel engines including those fitted with DPF emission systems.
- Also suitable for petrol engines with catalytic converters.
- Added to the General Motors approved engine oil list. Meets the latest GM dexos 2(TM) specification.
- New Easy Pour packaging with the 5L packs allow for a smooth, continuous stream of oil with each and every pour thanks to a built-in ANTI-GLUG TUBE TM combined with a wide spout.
- An ergonomic bottle and centralised handle design combined with easy to read labels make choosing and using the right oil simple.
SynPower 5W-40
Features and Benefits- SynPower 5W-40 engine oil has been developed for high performance applications.
- Utilising a zinc additive package, it delivers tough anti-wear protection without affecting emission systems.
- Enhanced thermal and oxidation stability resists oil breakdown.
- New Easy Pour packaging with the 5L packs allow for a smooth, continuous stream of oil with each and every pour thanks to a built-in ANTI-GLUG TUBE TM combined with a wide spout.
- An ergonomic bottle and centralised handle design combined with easy to read labels make choosing and using the right oil simple.
SynPower XL-IV C5 0W-20
Features and Benefits- Approved engine oil specifications for Audi, Skoda and Volkswagen.*
- Suitable for use in petrol and diesel engines fitted with FSI/TSI or TDI systems.*
- Catalyst compatible engine oil, suitable for the latest Euro IV and V engines.*
- Suitable for emission control systems like DPF and TWC. Low SAPS output keeps the emission control system in optimal condition.
- Superior protection and performance and suitable for long-drain intervals.
- Low viscosity and special additives result in maximum reduction friction which results in lower fuel consumption.