Previous Models

Showing all 3 results

  • M400 / M450MKII

    M400 alarm:- Complete remote – MRC400
    M450MKII alarm:- Complete remote – MRC450NZ
    M450MKi – discontinued
    Replacement plastic case: Part# 242021

    These Mongoose remote controls had a ‘fixed code’. 303.6MHz
    Replacement remotes need to be coded by us to suit your alarm system.
    The code is printed on a white label inside an existing remote control. To order a replacement, quote the above part number and the remote’s code number

  • M60 SERIES

    Pre 2009

    Complete remote: MRC60
    Replacement plastic case:
    Part# 242060 (upper design) or 242160 (lower design)

    A new remote has to be memorised into your security system for it to operate – this is called ‘code learning’. The coding instructions can also be found in your owners manual (which you can download from our website if yours is misplaced) or is detailed below. 433MHz

  • M80 SERIES

    Complete remote: MRC80
    Replacement plastic case: Part# 242080
    Suitable for: All pre-2009 M80 models & MX750

    A new remote has to be memorised into your security system for it to operate – this is called ‘code learning’. The coding instructions can be found in your owners manual (which you can download from our website if yours is misplaced) or is detailed below. 433MHz

    To learn new remotes to M80 models:

    Disarm by existing remote, or use the override
    Open the drivers door and leave open
    Turn the ignition ON/OFF 3 times – siren chirps
    Press arm button on first remote (siren chirps)
    Press arm button on second remote (siren chirps)
    Repeat for any other remotes
    Wait 10 seconds for learning process to complete

    To learn MRC80 to MX750

    Disarm by existing remote, or use the override
    Ignition ON and press override button 4 times and hold down on 4th press (siren chirps after 3rd press)
    Press arm button on first remote (siren chirps)
    Press arm button on second remote (siren chirps)
    Repeat for any other remotes
    Release the override button and turn ignition OFF
    NOTE: existing remotes must be re-learnt at the same time

FREE QUOTE