Our Products & Services
SynPower 0W-40
April 1, 2021
SynPower 5W-40
April 1, 2021
SynPower 5W-30
- SynPower 5W-30 is a full synthetic engine oil designed for modern petrol engines.
- This low viscosity formulation supports fuel efficiency requirements and delivers excellent cold start protection and faster flow at start up.
- It contains the latest technology to meet API SN PLUS specification and is suitable for use in GDI/TGDI engines where it protects against engine wear and Low Speed Pre-Ignition (LSPI).
- New Easy Pour packaging with the 5L packs allow for a smooth, continuous stream of oil with each and every pour thanks to a built-in ANTI-GLUG TUBE TM combined with a wide spout.
- An ergonomic bottle and centralised handle design combined with easy to read labels make choosing and using the right oil simple.
Enquiry about SynPower 5W-30
Enter the security code shown above
- API SP
- API SN Plus/RC
- API SN Plus
- API SN
- API SM
- API SL
- ILSAC GF-6A
- ILSAC GF-5
- ILSAC GF-4
- GM dexos 1 GEN 2
- Chrysler MS-6395
- FORD WSS M2C-946-B1
- FORD WSS-M2C-946-A
- FORD WSS-M2C-929-A
- GM 4718M
- GM 6094M
| Part Numbers | Pack Size | APN | TUN |
|---|---|---|---|
| 1299.51 | 205LTR | ||
| 1299.52 | 60LTR | 9310009020550 | |
| 1299.20 | 20LTR | 9310009013217 | |
| 1299.05 | 5LTR | 9310009014504 | 19310009014501 |
| 1299.01 | 1LTR | 9310009015754 | 19310009015751 |
| 1299.06 | 6LTR | 9310009021557 | 19310009021554 |
SynPower 5W-30 is a low viscosity, full synthetic engine oil formulated with a combination of premium synthetic base stocks and advanced additive technology.
Designed for modern petrol engines, SynPower 5W-30 meets the ILSAC GF-5 fuel efficiency specification as well as GM dexo1(TM)GEN 2 specification.
It also meets the latest API SN PLUS specification and is suitable for use in GDI/TGDI (Gasoline Direct Injection and Turbocharged Gasoline Direct Injection) engines where it protects against engine wear and Low Speed Pre-Ignition (LSPI).
It is suitable for use in a variety of applications including Ford; Holden; Mazda; Nissan, Subaru and Toyota.*
Note: This product is NOT recommended for use in diesel engines
*Refer to owner’s manual for recommended oil specifications and change intervals.
Related products
-
SynPower 5W-40
Features and Benefits- SynPower 5W-40 engine oil has been developed for high performance applications.
- Utilising a zinc additive package, it delivers tough anti-wear protection without affecting emission systems.
- Enhanced thermal and oxidation stability resists oil breakdown.
- New Easy Pour packaging with the 5L packs allow for a smooth, continuous stream of oil with each and every pour thanks to a built-in ANTI-GLUG TUBE TM combined with a wide spout.
- An ergonomic bottle and centralised handle design combined with easy to read labels make choosing and using the right oil simple.
-
SynPower ENV C2 5W-30
Features and Benefits- Low viscosity oil enhances fuel efficiency.
- Low ash, phosphorous and sulphur content to protect emission reduction systems.
-
SynPower XL-IV C5 0W-20
Features and Benefits- Approved engine oil specifications for Audi, Skoda and Volkswagen.*
- Suitable for use in petrol and diesel engines fitted with FSI/TSI or TDI systems.*
- Catalyst compatible engine oil, suitable for the latest Euro IV and V engines.*
- Suitable for emission control systems like DPF and TWC. Low SAPS output keeps the emission control system in optimal condition.
- Superior protection and performance and suitable for long-drain intervals.
- Low viscosity and special additives result in maximum reduction friction which results in lower fuel consumption.