S9740 • CPE510 5GHz 13dBi Wireless Access Point

TP-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, the CPE510 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE510 an ideal choice for both business and home users.

Enterprise Hardware
With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE510 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -30℃ to +70 ℃.

TP-LINK MAXtream TDMA Technology
As network scale increases, wireless competition and collisions among CPEs and base stations will be
so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user
experience. To mitigate these effects, the CPE510 uses MAXtream TDMA Technology.

Pharos Control – Centralized Management System
CPE510 also comes equipped with centralized management software that helps users easily
manage all the devices in their network from a single PC – Pharos Control. Functions like device discovery, status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.

Features

• Built-in 13dBi 2×2 dual-polarized directional MIMO antenna
• Adjustable transmission power from 0 to 27dBm/500mw
• System-level optimizations for more than 15km long range wireless transmission
• TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
• Centralized Management System – Pharos Control
• AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes
• Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

• Altronics Code: S9740
• Barcode: 9321758174999
• Shipping Weight: 0.82000Kg
•  Packaging Sizes
• EACH: 1
•  Printed Catalogue Page 190

190 (1)

• • Hardware Features
  • Processor: Qualcomm Atheros Enterprise AR9350B 560MHz CPU, MIPS 74Kc
  • Memory: 64MB DDR2 RAM, 8MB Flash
  • Interface :
  • 1 x 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
  • 1 x 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)
  • 1 x Grounding Terminal
  • 1 x Reset Button
  • Power Supply: Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
  • Voltage range: 16-27VDC
  • Power Consumption: 13 Watts Max
  • Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
  • Dimensions: 224W x 79D x 60H mm
  • Antenna Type: Built-in 13dBi 2×2 Dual-polarized Directional Antenna
  • Beam Width: 45° (H-Plane) / 30° (E-Plane)
  • Protection: 15KV ESD Protection
  • 6000V Lightning Protection
  • Enclosure: Outdoor ASA stabilized plastic material
  • IPX5 waterproof Certification
  •  
  • Wireless Features
  • Wireless Standards: IEEE 802.11a/n (with Pharos MAXtream disabled)
  • Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)
  • Wireless Speeds: Up to 300Mbps (40MHz,Dynamic)
  • Up to 144.4Mbps (20MHz,Dynamic)
  • Up to 72.2Mbps (10MHz,Dynamic)
  • Up to 36.1Mbps (5MHz,Dynamic)
  • Frequency: 5.15~5.85GHz
  • Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.
  • Reception Sensitivity:
  • – 802.11a:
  • 54M: -75dBm, 48M: -76dBm, 36M: -83dBm, 6-24M: -95dBm
  • – 802.11n:
  • MCS15: -73dBm, MCS14: -74dBm, MCS13: -76dBm,
  • MCS12: -80dBm, MCS11: -83dBm, MCS10: -88dBm,
  • MCS9: -90dBm, MCS8: -93dBm, MCS7: -73dBm,
  • MCS6: -74dBm, MCS5: -76dBm, MCS4: -80dBm,
  • MCS3: -83dBm, MCS2: -88dBm, MCS1: -90dBm, MCS0: -93dBm
  • Transmission Power: 27dBm/500mw (Adjustable power by 1dBm)
  • Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.
  •  
  • Software Features
  • Wireless Configurations:
  • – Pharos MAXtream TDMA Technology
  • – 802.11a/n Modes
  • – Selectable Channel Width: 5/10/20/40MHz
  • – Automatic Channel Selection
  • – Transmission Power Control
  • – Dynamic Frequency Selection (DFS)
  • – WDS Enable/Disable
  • – Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
  • – SSID Broadcast Enable/Disable
  • – Multi-SSID with VLAN Tagging (AP mode only)
  • – Distance/ACK Timeout Setting
  • – Wireless MAC Address Filter
  • – Wireless Advanced:
  • – Beacon Interval/RTS Threshold/Fragmentation
  • – Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
  • Management:
  • – Discovery and Remote Management via Pharos Control application
  • – HTTP/HTTPS Web-based management
  • – System Log
  • – SNMP Agent(v2c)
  • – Ping Watch Dog
  • – Dynamic DDNS
  • – SSH Server
  • System Tools:
  • – Wireless Signal Quality Indicators:
  • – Signal Strength/Noise/Transmit CCQ/CPU/Memory
  • – Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
  • – Spectrum Analyzer
  • – Speed Test
  • – Ping
  • – Traceroute
  • System-level Optimizations:
  • – Optimized IGMP Snooping/Proxy for multicast applications
  • – Hardware watch dog
  •  
  • POE Adapter Features
  • Interfaces:
  • 1 x AC Jack with Earth Ground
  • 1 x 10/100Mbps Shielded Ethernet Port (Power + Data)
  • 1 x 10/100Mbps Shielded Ethernet Port (Data)
  • Efficiency: 80%
  • Button: Remote Reset Button
  • Certifications: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
  • Power Status LEDs: 0~0.8A: Green, 0.8A~1.0A: Red
  • Output:
  • – 24VDC, 1.0A Max
  • – +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
  • Input Voltage: 100VA~240VAC @ 50Hz~60Hz
  • Dimensions: 110W x 57D x 33.5H mm
  • Input Current: 0.8A Max @ 100VAC
  • Input: 100-240VAC, 50/60Hz
  • Output Voltage: 24VDC(+4,5pins; -7,8pins)
  •  
  • Others
  • Certification: CE, FCC, RoHS, IPX5
  • Package Contents:
  • – Outdoor Wireless CPE
  • – 24V 1A Passive PoE Adapter
  • – Pole Mounting Straps
  • – AC Power Cord
  • – Installation Guide

*Specifications are subject to change without notice.